Swagman Rv 2 Bumper Adaptor (64025) 3142

Review for rv 2 bumper

Price was $45.49. We have a starcraft, travel trailer with a 4 inch rear bumper as specified. After reading a couple horror stories from a few earlier posted reviews i took the spare tire off the bumper and stored it under the bed for weight precautions. We drove from pennsylvania to gatlinburg, tennessee and back putting on about 1300 miles with two bikes and didn't have a problem. Worked like a charm, very happy with the purchase. No washers were included and will get them from the hardware store and remount it before i winterize. Great product for a good price.

-R. Kathlene

Rv 2 Bumper This Adapter Attaches To An Rv Bumper To Provide A 2″ Receiver Opening That Works Hitch Mounted Bike Racks. The Bumper Adaptor Can Me Mounted On Dot Rated, Continuously Welded Steel -Swagman Rv 2 Bumper Adaptor

  1. Additional: Fits: 4″- 4. 5″ Continuously Welded Steel Bumpers.
  2. Additional: Easy Installation.

Buy Swagman Rv 2 Bumper Adaptor (Outdoor Recreation Product) 64025

Buy Now


The adaptor works well to hold my 4-bike rack on my rv bumper. I installed tether straps to the roof of my rv to help support the load that 4 bikes can exert when going over bumps in the road. My only complaint is the "anti-sway" bolt on the adaptor doesn't work very well. I can tighten it all the way down and it always works itself loose. After a couple of long trips, the 2" square tube on my bike rack has a noticeable indention from the "anti sway" bolt, indicating to me that no matter how tight i get the bolt, the square tube will deform and allow the rack to sway. The adaptor still holds the rack securely, but my bike rack shifts back and forth more than i like. Best rv 2 bumper | Swagman-Outdoor Recreation Product Review as-of ( Jan 2019 ) Additional Swagman RV 2" Bumper Adaptor Creates a 2" trail hitch receiver compatible for carrying one hitch mount rack. Fits: 4"- 4. 5" continuously welded steel bumpers. Easy installation. Solid steel construction. 4" bolts included .

Swagman rv 2 bumper adaptor Review (64025)

We purchased this to put a cargo rack for our generator on our travel trailer. After reading the horror stories about people losing their bumpers we decided to reinforce the bumper by adding straps from the bumper to the frame and by cutting the cargo rack neck part as short as it would go so it sits right against the bumper. We used the champion 2000 generator and a 2. 5 gallon gas can and there was no twisting or pulling of the bumper. This hitch held well and it is now a permanent part of our trailer. -C. Shawna

Swagman Rv 2 Bumper Adaptor

  • Order: Sports
  • Brand: Swagman Bicycle Carriers
  • Color: Black
  • EAN: 0776214640256
  • Product Dimensions:
    Height:3.40 inches
    Length:6.47 inches
    Weight:9.00 pounds
    Width:6.46 inches
  • Manufacturer: SWAGMAN
  • Warranty-Part: Parts
  • Model: 64025
  • MPN: 64025
  • Total: 1
  • Quantity: 1
  • Part/Serial Number: 64025
  • Sub-Type: Sports
  • ReleaseDate: 2008-12-08
  • Size: 2-Inch
  • UPC: 783847164875

rv 2 bumper Sports, This adapter attaches to an rv bumper to provide a 2" receiver opening that works with hitch mounted bike racks. the bumper adaptor can me mounted on dot rated, continuously welded steel bumpers on travel trailers, 5th wheels and motorhomes to create a hitch receiver for bike racks. it is not to be used for towing or carrying anything other than bike racks. if you cannot identify your bumper is appropriate, please contact your manufacturer or local rv dealer for clarification. over 200, 000 units in the marketplace with zero failures, this bumper adaptor is built to unparalleled specifications. grade 10. 9 bolts and high strength steel are tested during each production to ensure maximum quality and durability. when utilzed with threaded hitch pins (locking or regular) and the anti-wobble scet screw, it provides a secure way to carry your bikes. if required due to space constraints, it can be mounted upside down, without any reduction in performance. it is coated with a formulated powder coat finish to resist corrosion and is covered under a limited lifetime warranty. Swagman Rv 2 Bumper Adaptor (64025-Swagman Bicycle Carriers).

Swagman Rv 2 Bumper Adaptor Sports

rv 2 bumperSwagman RV 2" Bumper Adaptor (Switch to Mobile/Desktop Version)

Works as i expected it to. The bolt holes could be a bit closer together for a tighter fit but was probably built this way to ensure it fits all 4 inch bumpers. I haul a cargo rack and spare tire on it. Very durable.

Swagman Rv 2 Bumper Adaptor
Click to see NoticeSwagman Rv 2 Bumper Adaptor (64025)"Attached this to the bumper of our self refurbished 89 coleman popup bumper. The bolts themselves i wish were threaded with an extra 1/2 inch of thread (rear bumper of camper is on the short side of the 4" vertical), but was able to use a 1/2 metal 'shim' and it tightened perfectly. Front to back, our bumper actually has a thin sheet metal knockout at the lower part of the bumper, but a slight modification (two holes to accommodate the bolts) in that thin piece of metal, it attaches perfectly. Other small snag is that the bumper on our camper is snug up against the plastic back panel of the camper. This was also not a problem as the plastic was flexible and my wife & i were able to push the flexible plastic back enough to put a 1x2 on either side of the work area, allowing room to install the bolts. This thing is a solid (read sturdy) piece of metal with strong bolts and strong metal lower plate. We purchased a four bike bike rack and it inserts and secures rock solid! love it for the price! . . One minor negative (minor at least to me). The hole for the trailer hitch pin was too small to accommodate both of the hitch pins that i own. Both of which fit fine in the curt hitch i had on my crv and fine with the hitch that comes with my tacoma. I own a dremel that has a grinding bit. A few seconds shaving (and i mean very little) the interior of the hole and pin was snug and secure. If the hole was perfectly sized to the standard pin size, i'd have given a 5 star. As it stands i would highly recommend this for anyone who needs to add a basic (minor load) hitch to the back of their camper to haul their bikes, so long as you have a little bit of handy in your blood to make minor tweaks. ; -)"

Appliances, Heating, A/C & Ventilation » Awnings, Screens & Accessories » Cleaning, Storage & Maintenance » Covers » Electronics » Engine & Chassis Parts » Freshwater Systems » Furnishings & Interior Accessories » Hitching & Towing » Leveling & Stablilization » Lighting » Outdoor Furniture » Power & Electrical » Steps & Ladders » Tires » Waste Water & Sanitation » Wheels » Swagman Rv 2 Bumper Adaptor (Outdoor Recreation Product) 64025

Camco 40043 TastePURE Water Filter Flexible Hose Protector

Camco tastepure rv water filter with flexible hose protector reduces bad taste, odor, chlorine and sediment in drinking water with a 20 micron sediments filter. Durable in-line, exterior mount filter has a wider body to increase flow. Includes flexible hose protector to minimize kinking that could impede water flow. Not designed for fish tanks or ponds. No testing has been done for this purpose.

Camco 40043 TastePURE Water Filter Flexible Hose ProtectorCamco-40043-TastePURE-Flexible-Protector

Price :    $17.00 (was $25.52)
  • Larger capacity in-line rv water filter lasts an entire season
  • High-flow carbon filter with kdf to help prevent bacteria growth
  • 100 micron sediment filter
  • Csa low lead content certified and complies with california's ab1953 and vermont act 193 low lead laws
  • Greatly reduces bad taste, odors, chlorine and sediment in drinking water
Brand :    camco
Color :    Multi
Weight :    1.30 pounds
Model :    40043
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 40043 TastePURE Water Filter Flexible Hose Protector available as-of ( Jan 2019 )

Pro-Series 63124 Eclipse Black 2-Inch Sq. 4 Bike Carrier

This bike carrier has a strong center tower design, folds for storage and includes a reflector for added safety. The tilt feature allows easy trunk access and unloading of bikes. It has hoop and loop straps that permit quick and easy bike loading and removal. It has soft rubber cradles that protect bike finish. It also has rear reflector for added safety and fits the 2 inches receivers.

Pro-Series 63124 Eclipse Black 2-Inch Sq. 4 Bike Carrier63124-Eclipse-Black-2-Inch-Carrier

Brand :    pro series
Color :    Black
Weight :    1.94 pounds
Model :    63124
Quantity :    1
Order click here :    normally ships in 24 hours
  • Tilt feature allows easy trunk access and unloading of bikes
  • Soft rubber cradles protect bike finish
  • Rear reflector included for added safety
  • Fits 2 inches receivers. please note: this bike carrier has a strong center tower design, folds for storage and includes a reflector for added safety.
  • Hook and loop straps permit quick and easy bike loading and removal
Price :    $106.03 (was $114.34)
Automotive Parts And Accessories :    Best Auto Accessory (Automotive Parts And Accessories product review) for Pro-Series 63124 Eclipse Black 2-Inch Sq. 4 Bike Carrier available as-of ( Jan 2019 )

Swagman 4-Bike Standard Rack 2 Receiver

The original 4 bike transports up to 4 bikes on a 2" receiver hitch. Solid design and construction as all of our original series. New swedge design facilitates quick and easy assembly and disassembly for storage. Soft krayton cushions protect your bike and provide additional gripping power. Recommended for the back for rv's.

Swagman 4-Bike Standard Rack 2 ReceiverSwagman-4-Bike-Standard-Rack-ReceiverThe 4-bike standard rack from swagman transports up to four bikes behind your rv or motor home on a 2-inch receiver hitch. Built solid for years of use, the rack features a swedge design to facilitate quick and easy assembly and disassembly. Soft kraton cushions protect your bike and provide additional gripping power while the flexible top plate is able to accommodate different top tube sizes. The rack offers a generous weight capacity of 35 pounds per bike. The standard rack features soft kraton cushions to protect and grip the bikes securely.

Price :    $106.98
  • Fits into a 2" receiver
  • Recommended for the back of rv's
  • Transport up to 4 bikes
  • New swedge design facilitates quick and easy assembly and disassembly for storage
  • Soft kraton cushions protect your bike
Brand :    swagman bicycle carriers
Size :    2-Inch Receiver
Weight :    33.00 pounds
Model :    64400
Quantity :    1
Order click here :    normally ships in 24 hours
Sports :    Best Outdoor Recreation Sale (Sports product review) for Swagman 4-Bike Standard Rack 2 Receiver available as-of ( Jan 2019 )

Camco 40325 No Insect Bumper Cap Pack of 2 - No Saver

Replace lost or damaged rv bumper caps with camco's no insect rv bumper caps featuring small vent holes and squeeze grip for easy installation and removal. Having several small vent holes instead of one big hole allows for ventilation while keeping flying and nesting insects out. Ridged sides will help prevent the bumper cap from coming loose while driving down the road. Constructed of durable polyethylene and comes in a pack of 2. The caps fit standard 4 square rv bumpers.

Camco 40325 No Insect Bumper Cap Pack of 2 - No SaverCamco-40325-Insect-Bumper-Pack

Brand :    camco
Size :    Pack of 2 - No Saver
Model :    40325
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 40325 No Insect Bumper Cap Pack of 2 - No Saver available as-of ( Jan 2019 )
Price :    $3.00 (was $7.06)
  • Durable polyethylene construction fits standard 4" square rv bumper
  • Grip ribs help keep cap in bumper
  • Smaller holes provide ventilation while keeping flying and nesting insects out
  • Squeeze grip for easy installation and removal
  • Pack of 2

Camco 57363 Leveling Scissor Jack Socket

Camco's leveling scissor jack drill socket reduces the time and effort it takes to raise and lower your scissor jacks. The adapter fits 3/8" or 1/2" power drills and works with all 3/4"hex drive jacks.

Camco 57363 Leveling Scissor Jack SocketCamco-57363-Leveling-Scissor-Socket

Brand :    camco
Color :    1 Pack
Weight :    0.15 pounds
Model :    57363
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Auto Accessory (camco product review) for Camco 57363 Leveling Scissor Jack Socket available as-of ( Jan 2019 )
Price :    $4.43
  • Works with all 3/4"hex drive jacks
  • Fits 3/8" or 1/2" power drills
  • Reduces time and effort to raise or lower scissor jacks

Allen Sports Tension Bar Bicycle Cross-Bar Adaptor

Allen sports brings you a bicycle adaptor cross bar that adds a top tube to non-conventional frames. An internal spring maintains constant tension. Quickly attach this adaptor bar to a wide range of frame styles. Amazingly, its plastic coated hooks protect your bicycle's finish.

Allen Sports Tension Bar Bicycle Cross-Bar AdaptorAllen-Sports-Tension-Bicycle-Cross-BarMade by allen bike racks, this adaptor bar adds a top tube to your bicycle frame so that it can be installed properly on a bicycle carrier. It's designed to be used with hard-to-mount bike frames, such as full-suspension bikes, women's bikes, or other non-conventional designs. The bar features an internal spring that maintains constant tension to keep your bike secure. The product is designed to fit bikes that have a distance of 16 inches to 27 inches between the seat post and the stem, and installation is easy. Plastic-coated hooks are there to protect the finish of your bike. Manufacturer's warranty all of allen's products are backed by a no-nonsense lifetime guarantee. If an allen rack fails to function properly due to a defect in workmanship or material over the lifetime of the original purchaser, simply return the product with your original receipt, and allen will repair or replace the rack free of charge. This warranty does not cover damage or wear which occurs as a result of day-to-day use or general wear and tear. About allen sports usa allen's goal is to design and manufacture the finest bicycle carrying, parking, and storage racks available. Ever since dick allen started making rear-mounted bicycle carriers in his garage in lincoln, massachusetts, in 1967, the company has been committed to producing the highest-quality, easiest-to-use racks on the market.

Brand :    allen sports
Color :    Black
Weight :    2.30 pounds
Model :    900B
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Outdoor Recreation Sale (Automotive Parts And Accessories product review) for Allen Sports Tension Bar Bicycle Cross-Bar Adaptor available as-of ( Jan 2019 )
Price :    $10.95 (was $16.99)
  • Lifetime on workmanship and materials
  • Creates a top tube for non-conventional frames
  • Internal spring keeps your bikes secure.
  • Model 900b
  • Plastic coated hooks protect bicycle's finish.

Swagman XTC-4 Cross-Country 4-Bike Hitch Mount Rack 2-Inch Receiver Hitch

The cross country "xc" can accommodate any type of bike frame designs, without removing the wheels.   the xc slides into your hitch receiver and adjusts to different frame sizes with the simple movement of the wheel hoops.   frame grip arms have a soft coating to protect your bike's finish.   when not in use, the rack folds up for easy storage (on or off vehicle).   the xc carries the widest variety of bike frames in its class. Sold with 7. 5 vinyl coated security & receiver locking pin

Swagman XTC-4 Cross-Country 4-Bike Hitch Mount Rack 2-Inch Receiver HitchSwagman-Cross-Country-4-Bike-2-Inch-ReceiverTransport up to four bikes at once whether driving across country or to the campsite with the swagman xtc-4 cross-country bike rack. Designed to fit a two-inch receiver hitch, the bike rack makes it easy to load and unload your bikes from ground level. The rack includes a set of fast-adjustable, quick-release tire hoops and a ratcheting top arm, helping it fit a wide range of bike frames. In addition, the rack's center arm folds down when not in use, making it easy to access the rear of the vehicle without removing the rack. And to ensure that your rack doesn't rust over time, the xc-4 is powder coated. Built to provide more ground clearance than other racks, the cross-country rack comes with new and improved wheel straps for bicycle security.

Brand :    swagman bicycle carriers
Weight :    1.00 pounds
Model :    64665
Quantity :    1
Order click here :    normally ships in 24 hours
  • Set of easy-to-adjust, quick-release tire hoops
  • Powder-coated design protects against rust
  • Designed for 2-inch receivers; includes wheel straps
  • Center arm folds down for easy access to rear of vehicle
  • Cross-country bike rack that holds up to 4 bikes at once
Price :    $279.99
Sports :    Best Outdoor Recreation Sale (swagman bicycle carriers product review) for Swagman XTC-4 Cross-Country 4-Bike Hitch Mount Rack 2-Inch Receiver Hitch available as-of ( Jan 2019 )

4SQUARE SafetyStruts Prevent RV Bumper Failure TM

Safely add bumper-mounted hitches, bike racks, generators, and cargo to your rv. Common square tube rv bumpers weren't designed to carry much cargo weight as they are typically attached with just the thinnest of welds. Sure, you could pay someone to beef up the factory's bumper welds, but at $80 per hour, this gets expensive fast! plus, your thin-walled bumper is still "hanging" from the same attachment point as before. Instead, with only a drill and a couple of wrenches, you can install a superior solution in minutes. Be safe; be smart. These inexpensive parts bolt directly to your rv's frame and support the bumper from underneath, stopping the metal fatigue that leads to bumper failure. Combine with our bumper-mounted hilohitchtm and generator & cargo carrier trays (b00njakonq) for safest travel. Made in the usa and bounce-tested over 1 million cycles to determine 400 foot-pound cargo capacity. Travel safe with safetystruts!

4SQUARE SafetyStruts Prevent RV Bumper Failure TM4SQUARE-SafetyStruts-Prevent-Bumper-Failure

Brand :    mount-n-lock
Color :    Black
Model :    4SQ-SS2
Quantity :    2
Order click here :    normally ships in 1-2 business days
  • All versions include self-tapping bolts for tube frames and matching nuts for i-beam frames
  • * please understand product before ordering - some drilling required *
  • If in doubt, download our lifesize template from images section to confirm fit on your rv
  • Use selection guide image to pick version type: ss4: b00jascnee, ss0: b01f2lui12, s4c: b01l5kmv1y
  • View product video at youtu. be/w7ys33ktxhg review installation guide in images section
Price :    $64.95
Automotive Parts And Accessories :    Best Auto Accessory (mount-n-lock product review) for 4SQUARE SafetyStruts Prevent RV Bumper Failure TM available as-of ( Jan 2019 )

Swagman 3 Bike Standard 2 Inch Receiver

This economically priced, single-arm 3 bike carrier accommodates bikes of different sizes and frames. The flexible top plate secures your bikes in the soft-kraton vinyl padded cradles. The cushion helps to protect your bike and provides extra gripping power. It s steel construction makes this a long lasting and durable rack. Anti-rattle hitch pin holds the rack steady. This rack is rv approved and is recommended for the back of rv s, 5th wheels and motorhomes.

Swagman 3 Bike Standard 2 Inch ReceiverSwagman-Bike-Standard-Inch-Receiver

Price :    $89.60 (was $107.49)
  • Sturdy cradles with kraton vinyl cushioning helps protect frames and offers additional gripping power
  • Rv approved: can be used with a hitch on the back of rvs , campers, motorhomes
  • Anti-rattle hitch bolt reduces movement of rack in hitch receiver
  • Single-arm design works with many bikes that have alternative frames and frames with large tubing
  • Hitch-mounted rack carries up to 3 bikes on the back of your vehicle
Brand :    swagman bicycle carriers
Color :    Black
Weight :    22.40 pounds
Model :    64152
Quantity :    1
Order click here :    temporarily out of stock. order now and we'll deliver when available. we'll e-mail you with an estimated delivery date as soon as we have more information. your credit card will not be charged until we ship the item.
Sports :    Best Outdoor Recreation Sale (Sports product review) for Swagman 3 Bike Standard 2 Inch Receiver available as-of ( Jan 2019 )

Allen Sports Deluxe 4-Bike Hitch Mount Rack 2-Inch Receiver

Make getting to and from your biking trips a breeze with the allen sports deluxe trunk 4-bike rack for 2" hitch. This bike rack offers a quick, easy and safe way to transport bicycles on your 2" receiver hitch. Quick and easy assembly gets you on the road fast.

Allen Sports Deluxe 4-Bike Hitch Mount Rack 2-Inch ReceiverAllen-Sports-Deluxe-4-Bike-ReceiverCarry your bicycles securely and avoid the hassles of piled bikes or high threshold rooftop mounts, with the allen deluxe 4-bike hitch mount rack. Fitting vehicles with a 2-inch trailer hitch, the allen deluxe hitch mount rack is both easy to operate and super secure for your bikes. Constructed out of steel with a durable black powder finish, the rack is built to last and is backed up by a lifetime warranty by allen. The allen rack boasts a patented tie-down system and individually cradles up to four bikes in the 22-inch carry arms. As easy to install as it is to use, the rack sets up in less than 5 minutes with a no-wobble bolt that holds it still within the hitch. When the rack is not in use, the carry arms quickly drop out of the way and fold down flat with a patented single pin mechanism and the rack tilts up to allow easy access to the lift gate. Specifications: fits vehicles with a 2-inch trailer hitch holds up to four bikes 22-inch carry arms individual bike cradles steel construction black powder coat finish patented single key release system tie down strap minor assembly required about allen bike racks: in 1967, after a few years of working on the aerospace technology for the apollo missions, dick allen was out of a job. Government cutbacks led allen, a harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to cape cod or the white mountains of new hampshire. What proved difficult time and again was the transport of his family's bicycles. Rather than fight through inconvenience with twine and a dinged car, allen sought an answer for himself as well as a market in which he foresaw major growth possibilities. Always a pathfinder, allen took to work in his lincoln, massachusetts garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the allens tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, dick started allen bike racks. Dealer acceptance came quickly, and by 1971 allen bike racks were sold nationally through a number of major bicycle distributors. Today, the company owns over three-dozen patents and offers a versatile product line of bike racks while dick's son alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world. Manufacturer's warranty lifetime warranty

Brand :    allen sports
Size :    2-Inch Receiver
Weight :    23.95 pounds
Model :    542RR
Quantity :    1
Order click here :    normally ships in 24 hours
Automotive Parts And Accessories :    Best Outdoor Recreation Sale (Automotive Parts And Accessories product review) for Allen Sports Deluxe 4-Bike Hitch Mount Rack 2-Inch Receiver available as-of ( Jan 2019 )
Price :    $70.00 (was $75.00)
  • Sturdy steel construction with black powder coat finish; lifetime warranty
  • Rack sets up and installs in less than 5 minutes
  • Folding carry arms quickly drop out of the way when rack is not in use
  • 4-bike rack fits vehicles with a 2-inch trailer hitch only . vehicle will require professionally installed class iii or iv 2" hitch to use this product
  • 22-inch long carry arms individually secure bicycles with allen's patented tie-down system

swagman rv 2 bumper adaptor Price : 41.82, was : 46.49 as 2017-03-18
United States
Great Britain
World Wide
Swagman Rv 2 Bumper Adaptor (64025) Reviewed by on pewdo.com

Top swagman rv 2 bumper adaptor (64025) Content

The F.A.Q. for swagman rv 2 bumper adaptor

Product was great, but as with others, our bumper wasn't up to the added weight. We have a 2007 springdale 299, manufactured by keystone. We researched keystone's website and found a reference to using a bike rack on the back bumper, so we thought we were good to go. On our return trip from the oregon coast we were about 50 miles into the loaded trip when we heard rhythmic scratch sounds. My wife looked back and shouted that we were sparking! sure enough, the bumper "tore apart" at the welds and our bike rack which we had inserted into the bumper adapter was scraping the pavement. Luckily we were still in the "wet" forests of western oregon and nothing bad happened. . Our load when the bumper broke was a tow tuff cargo carrier with two adult bikes and two kids bikes. . Our bumper, which wasn't strong enough, was factory made, 4" square and 1/4" or 3/16" thick metal. You would need a heavier duty bumper to use this product.

A number of questions have been asked here.


(0) Question: How does bike rack or whatever you are attaching to hitch get secured. picture looks like a bolt. can you use standard hitch pin?

(1) Question: Will it support a cargo carrier with honda 2000 generator , ice chest and 5 gal fuel can?

(2) Question: This looks like it could be used for a 2 inch receiver unit designed to hold a flag pole, would you agree, has any one tried it?

(3) Question: What is the bolt spacing and bolt length?

(4) Question: Should i put something between the bumper and the adapter to prevent scratching? like a piece of rubber mat that you would put in a drawer?

(5) Question: What is the bike capacity. 2 or 3?

(6) Question: I have a fat tire bike - the tires are 4" wide will this unit work?

(7) Question: What are the weight restictions on this hitch adapter? would like to attach a cargo rack to the back of my rv

(8) Question: How far from the edge are the bolt holes. i have limited clearance

(9) Question: The rear bumper of my trailer is 4. 5" w/ the aluminium cover this one still gonna fit?

(note) Question: where/how to get Swagman Bicycle Carriers (manufacturer's brand) accessories & similiar Swagman Bicycle Carriers's products


Click the marked text to copy link to Clipboard

The adapter is easy to install and it is very sturdy. "nine more words are required to submit the review. "

Bestsellers, Outdoor Recreation ProductTop Swagman Rv 2 Bumper Adaptor (64025) FAQ Content

Best swagman rv 2 bumper adaptor (64025) in review

Make sure your bumper is sturdy enough to mount a bike rack. When they say must be used on a fully welded bumper they mean it. I welded the seam of my bumper the whole length between the trailer frame rails, otherwise the bike carrier would have bounced severely on bumpy roads. The locking bolt on this item works very well to help stabilize the bike carrier. The steel contsruction is heavy duty and the fasteners are good quality with nyloc nuts. Pulled the camper 700 miles last week with 2 26" bikes on the carrier with no problem.

F. Guest, Kansas

You might like to see Rush Moab 6 This Bag Is Made Of 1050-denier Nylon And Features An Ambidextrous Carry System, A Backup Belt System, Internal And External Organization, Front And Side Web Platform And A Carry Handle. -5.11 Rush Moab 6 Backpack
  1. Extra: Origin: Imported.
  2. Extra: Features Of This Item Include: Water Resistant.
Discount 5.11 Rush Moab 6 Backpack (Outdoor Recreation Product) 5.11 Rush Moab 6 Backpack (5
Or you might like to consider Performance Men's Ultra Boost M Running Step In To These Men's Running Shoes And You'll Rethink Everything You Know About What Fast And Comfortable Feels Like. They're Built Boost For Incredible Energy-returning Cushioning -Adidas Performance Men's Ultra Boost M Running Shoe
  1. Details: Adidas Primeknit Is Carefully Engineered To Naturally Expand With Your Foot While You Run To Give You A More Comfortable Fit And Help Reduce Irritation.
  2. Details: Boost's Energy-returning Properties Keep Every Step Charged With An Endless Supply Of Light, Fast Energy.
Discounted Adidas Performance Men's Ultra Boost M Running Shoe (Shoes) Ultra Boost M M Adidas Performance Men's Ultra Boost M Running Shoe (ultra boost m

W. Eleanor, Surrey says

Love this product. No issues. Unlike the versions that use two large u-bolts, instead of a bottom and top plate. I've had two u-bolts break - so, never again. I'll install one of these on any rv i own, from now on.

G. Powell, Georgia

We used this in conjunction with a 3 bike hitch mount for our trailer and this along with the rack is a space saver. Extremely easy to install and can provide multiple functions depending on your application.

L. Isabel, Worcestershire says

It is what it is. Don't tighten the bolts too much or you will squeeze the bumper and have issues with your sewer hose. I can't put my sewer hose through anymore, i have to put one on each side now.

I. Crawford, Minnesota

This add-on hitch is much sturdier then it looks in the picture. I have another brand bumper hitch adapter that i currently use for a cargo carrier on the back of my ttrailer. The plate metal and bolt size are the same on both of these, even though the other unit cost more than twice the price. I am going to use this unit on top of my tt bumper as it is pictured and place a bike carrier in it. With the cargo carrier on one side, and the bike carrier on the other, i can haul both on my back tt bumper. I have looked at my bumper throughly. It is welded firmly onto the frame of the tt. I am of the opinion that using both of these will not harm the bumper or trailer, but i do plan on lightly loading the carrier and to keep on eye on both when towing. I love the side screw because when tightened it keeps the bike carrier from floping side to side. Did i say that i love this hitch? i do. Highly recommended.

X. Pete, Hackney says

I can only echo what others have said. The quality is very good, the cost is reasonable, and it worked like a charm. If you came to this item because you need/want something like this then look no more, just buy this and problem solved! on a side note, and this is not to do with the item, i had to wrestle with positioning of it on the bumper trying to get the bikes centered. Also my spare tire mount essentially limited my bike carrier to 3 bikes vs. 4. I probably could have gotten all 4 on but for me it was easier to put the smallest bike in the bed of the truck.

E. April, West Berkshire

I bought this to mount on the rear bumper of a camper in order to mount a cargo carrier. The mount is well made, very heavy materials and the brackets and mounting hardware that came with it are a perfect match. This mount also has an additional cinch bolt to stop the carrier from excessive movement. For the purpose it is exactly what i needed. One note of caution - if you are mounting this on an rv bumper make sure the bumper is heavy steel and continuous weld type. Even a few bikes on a bike rack can put a lot of strain on the rear bumper going down the road, bumps, etc. If in doubt, check with an rv dealer. For my purpose on an older camper with a heavy steel rear bumper this is the perfect match.

C. Anonymous, Poole says

Purchased this for a 4 x 4 bumper on a travel trailer to hold a bike rack. This is made for also 4. 5 x 4. 5 so when it is installed it should be centered front to back. There is a concave to the top plate where the 2 x 2 tubing is welded. I am not sure if this is design or from the welding operation. It did not straighten much when the bolts were tightened. It should have suggested a torque rating for the bolts. The side bolt is nice to limit slop in the rack. My rack has a bolt in the side of it instead of a hitch pin. With both bolts tightened it hardly moves.

T. Anonymous, Birmingham

I bought this for the rv. I tow a car and also had a heavy-duty bike rack on the hitch. The bike rack got in the way of the tow bars when swinging them up to fold them into the storing position. This bumper adapter allows me to put the bike rack a little off center so there's still room to fold the tow bars up without interferring with the bike rack. Before installing the bumper adapter, i placed a strip of rubber around the bumper to protect it from scratching. It works great.

N. Valdez, Rheinland-Pfalz says

Works as expected. Just 4 bolts to clamp around the bumper. Just beware of your bumper's capacity. My problem now is it is ripping the bumper off from the up and down movement of hitting bumps. I had a cargo carrier with about 75 pounds on it. I will have to resupport the bumper or just buy a camper hitch to mount to frame.

O. Guest, South Dakota

There is some talk in various forums about using this type of item on an rv trailer bumper. The concern is not with the item itself but how securely the bumper is welded to the frame of the trailer. On my keystone springer model the bumper is very solidly attached. It came with a spare tire holder attached to the bumper in a similar fashion. . With this item i was able to reuse my u haul brand 2 inch to 1 1/4 inch adapter for our thule bike rack. We've made our first trip with 2 bikes on the rack and going about 125 miles each way with no problems. The nuts are self locking so if they did come loose there would be low chance of one falling off.

B. Perez, Hounslow says

I bought this so we could use our receiver hitch bike rack on the rear of our hybrid expandable camper. The bumper was 4" square, and this worked great. I had to mount it on the underside of the bumper however since there wasn't enough clearance on the top side. I also had to slide the spare tire holder down to one end. I use an extended receiver hitch and a slip over bike rack so i can extend the rack out beyond the spare tire. I worked great. I will keep an eye on the welds for the bumper. It seems very sturdy, but i've read that some aren't welded as good as others and there can be a lot of torque with the weight of 3-bikes hanging out 24-30" to the rear.

S. Rhonda, Yukon Territory

Put the swagman rv receiver hitch bumper adaptor on the 4" continuous steel bumper on my. 22' jayco fb camper. I moved the spare tire, which is attached to a rack-like devise which is then attached to the bumper with 2 large u clamps and nuts, to the right side of bumper so that neither the spare tire nor the bike rack that will go into the bumper adaptor would interfere with the line of sight to the liscense plate. Then i put the bumper adapter just right of center as we'll use it for the allen 2 bike rack that i also purchased on online store. Very easy to install-just attach to the bumper and tighten the bolts. Since it will accomodate a 4 1/2" bumper there is a small space-1/2"-between the bolts and the bumper but if you tighten this down as you should its very unlikely to move or shift. But i'll probably add a wood spacer between the bolts and the bumper anyway. You could use lock washers and/or a 2 nut system but that doesn't seem necessary to me.

Leave a Reply

You must be logged in to post a comment.

Top rv 2 bumper Review Content

Related Products

Product Image Gallery